OpenIPC "Mario" AIO - Mads Tech Wiki

Information

The OpenIPC Mario AIO is a Wifi derived VTX & Camera designed by the OpenIPC project for use with OpenIPC FPV.

It is based on SigmaStar SSC338Q, the WiFi chip is RTL8812AU and 16M NOR flash

OpenIPC AIO “Mario” v1.0 Specifications (From OpenIPC)

Ultra-small 16 layer pcb board size 30mm x 32mm (which blows the side covered with gold)
Main board has 4 x M2 mount holes and distance between hole centers 25.5mm x 25.5mm
Main board weight – 9.86 g, radiator weight – 7.36 g, fan weight – 5.37
The main processor of the system is SigmaStar SSC338Q, the WiFi chip is RTL8812AU and 16M NOR flash
Built-in Inertial Measurement Unit (IMU) for user applications working with a gyroscope and accelerometer
Built-in waterproof I2S high quality microphone (installed, but not yet activated in the firmware)
Onboard dual-way BEC supporting 2S-6S (7,4V-24V) power supply
150mm MIPI cable to connect the sensor to the main board
IMX335 sensor (14x14mm) with a 150° Field of View (FOV) M8 lens
New colorful camera case, color is random
Dual-band RF output with onboard 30dBm x2 power amplifiers for the 5G band
Two dual-band antennas, dipoles with 6 dBi gain and 130mm cable included
GH1.25 connector with a 100mm cable for direct flight controller telemetry communication
Interface connector for connecting an LWIR sensor or using it for SPI/I2C/PWM/GPIO
USB Type-C port for debug and settings, with built-in Ethernet output (CDC-Ether, RNDIS)
Onboard SD card for video recording and system updates
Integrated heat sink with 20mm x 20mm mount holes and cooling fan
On the side surface of the main board there is a laser engraving “This is original device from OpenIPC”
Very easy automatic firmware update from SD card

TBP

TBP