DJI FPV Remote V3


DJI DJI FPV Remote V3 is the third remote from DJI designed for their FPV systems. The FPV remote series is designed to be used with specific models along side FPV Goggles and does not offer a video output or display option.


Engineered for DJI O4 video transmission with an integrated antenna design, it is lighter than its predecessor and boasts a longer operating time. The control sticks are extended by 2 mm, catering to single and dual-fingered control. In addition to Normal and Sport modes, the DJI FPV Remote Controller 3 offers Manual mode, better suited for advanced players to practice and master more sophisticated skills.

GFSK Transmission.

The DJI Avata 2 is based on O4 and there has been a change to how the remote controller works with the drone, in previous models the DJI remote communicated with the drone directly however with the Avata 2 the DJI FPV Remote V3 and DJI RC Motion 3 now communicate with the DJI Goggles 3 via a 2.4Ghz GFSK protocol and the goggles pass that communication onto the drone. As a result is not possible to fly the DJI Avata 2 with out the DJI Goggles 3 being turned on and corrected. Any loss off goggles connection will result in the Drone entering failsafe.


Max Operating Time Approx. 10 hours
Operating Temperature -10° to 40° C (14° to 104° F)
Charging Temperature 0° to 50° C (32° to 122° F)
Charging Time 2 hours
Charging Type 5 V, 2 A
Battery Capacity 2600 mAh
Weight Approx. 240 g
Dimensions 165×119×62 mm (L×W×H)
Operating Frequency 2.400-2.4835 GHz GFSK Transmission.
Transmitter Power (EIRP) 2.400 GHz: <26 dBm (FCC) <20 dBm (CE/SRRC/MIC)


DJI Avata 2 / DJI Goggles 3 Only

Teardown Video


DJI FPV Remote V3 Internal Images

Leave a Reply 0

Your email address will not be published. Required fields are marked *